Graule ZS200 Radial Arm Cross Cut Saw

A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and  joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials.

 

Specification

Precision ball bearing movement on hardened steel runners.
Sturdy cast iron construction with steel base stand
Heavy duty 5 KW motor.
Spring return of saw carriage.
1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel.
50mm spindle diameter.
22 - 90 - 45 horizontal movement. (Swivel)
30 - 90 - 60 vertical movement. (Tilt - optional N model)
Adjustable upper protection.
520mm TCT sawblade Z60.
Cutting Capacity:
420 wide x 200mm deep at 90 degrees.
295 wide x 200mm deep at 45 degrees.
420 wide x 140mm deep at 45 degrees. (Tilt- optional N model).
Dust extraction outlet 100mm.
Working height of table 900mm

‚Äč

Optional Equipment

Hydrocheck
NC motorised positioning for horizontal and vertical axis with digital readout and set position
Tilting from front with handle 
Digital readout for both vertical and horizontal axis
Digital readout for horizontal swivel of the sawblade ( new type )
Digital readout for vertical tilting of the sawblade 'N' model. ( new type )
Laser to show cutting line - 300mm long line
Spare 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. For Wood
520mm dia TCT x 4.4mm kerf x 50mm bore - 120 teeth FTZ triple chip. For aluminium and plastics
550mm dia TCT x 4.4mm kerf x 50mm bore - 180 teeth FTZ triple chip. For aluminium and plastics
Vertical pneumatic clamps to left & right side of saw
Pneumatic spray
Extended cutting stroke - max 500mm at 90 degrees
Increased capacity to 550mm blade / 215mm max depth of cut ZS200
Increased capacity to 550mm blade / 215mm max depth of cut ZS200N 
Increased capacity to 600mm blade / 240mm max depth of cut ZS200 (600mm blade not possible on tilting model)
600mm TCT saw blade 5.5mm kerf 50mm bore max depth of cut 240mm

 

Enquiry? Contact Us
+44 (0)151 548 9000            info@crosscutsaws.co.uk